Filter
Top Products
PRV-LX1 RS-422A Protocol
8.0 Product-Specific Notes
8.1 Recording Delay
There is a short delay of approximately 29+/-2 frames between when the PRV-LX1 is issued a record
command and the command is executed.
This delay is a result of the following:
Requires 12 frames for encoding system setup
Execution of the command may take +2 frames
Execution of the command may take–2 frames
Record default offset for the LX1 is 17 frames
The above delay shows the calculation of a maximum +29 frames +/- 2 frames delay.
Pioneer Electronics suggest that PRV-LX1 users pad these frame times to the head/tail of the selected
I/O points to ensure that an entire video sequence is recorded.
Page 16 of 18