Pioneer D1200SPL Stereo Amplifier User Manual


 
Specifications
Power source ........................................................................................................ 14.4 V DC (10.8 V to 15.1 V allowable)
Grounding system .......................................................................................................................................... Negative type
Current consumption ........................................................................................................ 44 A (at continuous power, 4 )
Average current drawn* .......................................................................................................... 12 A (4 for one channel)
26 A (2 for one channel)
34 A (1 for one channel)
Fuse ........................................................................................................................................................................ 40 A × 4
Dimensions ...................................................................................................................... 381 (W) × 65 (H) × 282 (D) mm
Weight .................................................................................................................... 6.0 kg (Leads for wiring not included)
Maximum power output ...................................................... 1 000 W × 1 (4 ) / 2 000 W × 1 (2 ) / 2 400 W × 1 (1 )
Continuous power (14.4 V) .................................................................. 4 , 20 Hz to 240 Hz, 1.0 % THD, 500 W × 1
2 , 50 Hz, 1.0 % THD, 1 000 W × 1
1 , 50 Hz, 2.0 % THD, 1 200 W × 1
Load impedance ........................................................................................................................ 4 (1 to 8 allowable)
Frequency response .......................................................................................................... 10 Hz to 240 Hz (+0 dB, –3 dB)
S/N ratio ........................................................................................................................................ 80 dB (IEC-A network)
Distortion .................................................................................................................................. 0.3 % (10 W/4 , 100 Hz)
Low pass filter ............................................................................................................ Cut off frequency: 40 Hz to 240 Hz
Cut off slope: –24 dB/oct.
Subsonic filter (HPF) .............................................................................................................................. Frequency: 20 Hz
Slope: –24 dB/oct.
Bass boost .............................................................................................................................. Frequency: 40 Hz to 120 Hz
Level: 0 / 6 / 9 / 12 dB
Gain control .................................................................................................................................... RCA: 400 mV to 6.5 V
Maximum input level / impedance ...................................................................................................... RCA: 6.5 V / 22 k
Note:
Specifications and the design are subject to possible modification without notice
due to improvements.
*Average current drawn
The average current drawn is nearly the maximum current drawn by this unit
when an audio signal is input. Use this value when working out total current
drawn by multiple power amplifiers.
18
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
êìëëäàâ