Pioneer PRS-D1200M Stereo Amplifier User Manual


 
13
ENG/MASTER 96
<YRD5194B> 14
Connecting the Unit
Four Amplifier
MODE SELECT switch
must be in MASTER position.
Connect to a car stereo.
For details, see the
Connection Diagram.
Connecting wire with RCA
pin plugs (sold separately).
Connecting wire with
RCA pin plugs (sold
separately).
Connecting wire with RCA
pin plugs (sold separately).
MODE SELECT switch
must be in SYNC position.
MODE SELECT switch
must be in SYNC position.
MODE SELECT switch
must be in SYNC position.
1 to 8
1 to 8
1 to 8
1 to 8
SYNC OUT
SYNC IN
SYNC
OUT
SYNC IN
Use speakers having an impedance from 1 to 8 .
The setting of the POWER MODE switch varies according to the speaker impedance. See the Setting the
Unit section for details. The same setting is used for four amplifiers.
SYNC OUT
SYNC IN
1_YRD5194B_Eng 2009.11.12 1:42 PM Page 14