Pioneer PD-F957 Stereo System User Manual


 
<PRB1273>
En
12
MODE
3
1 2
3
MODE
783
RANDOM
DISC
SET
TRACK
SET
TIME/
CHARA
HI-LITE BEST
PREVIOUS
POWER
MODE CLEARPGMREPEAT
D
Î
FILE-TYPE CD PLAYER
REMOTE CONTROL UNIT
CU-P0089
TITLE
DISPLAY
TITLE
INPUT
1¡4¢
CURSOR
<>
PQRS
7
TUV
8
MARK
0
WXYZ
9
GHI
4
JKL
5
MNO
6
1
ABC
2
DEF
3
DISC
+
VARIOUS OPERATIONS
This unit lets you program up to 100 of your favorite discs. For
example, you can store all the discs of your favorite artist, or some
other group of personal selections, and play only those discs.
You can even add other discs to the custom later on.
Operation example: Storing discs 3 and 12 in the CUSTOM II
file.
During stop mode, press
MODE so that the CUSTOM
II indicator lights.
÷ If you use DISC (–/+) to select a disc, it will be programmed
automatically after approximately 2 seconds.
To program and play only the discs
you want to hear (CUSTOM play)
÷ The parenthesis ( ) show operations for the main unit.
Use the digit buttons to
select disc.
÷ If some disc number appears, press CLEAR.
Press DISC SET.
Repeat steps 2 and 3 to
store other discs.
4
3
2
1
\
To start playback
Press MODE to select CUS-
TOM and press 3.
Playback starts from the lowest
disc No.
1-BIT
-
DLC
DIRECT LINER CONVERSION
D
FILETYPE
COMPACT DISC PLAYER
◊Û¿X/.≥
Î
SINGLE
LOADER
ACSESS
PLAY
STANDBY/ON
UNLOAD BEST PREVIOUS
DISC
TITLE
INPUT
PROGRAM
TRACK MIN SECDISC
TITLE
DISPLAY
HI-LITE CLEARMODE
OPEN/
CLOSE
67 ¡¢
41
'
FILE TYME CD MECHANISM
+
DISC (–/+)
6
MODE CLEAR
÷ The remote control is the most convenient way to perform these
operations.
3
MODE
CLEAR
Digit buttons
DISC SET
DISC (–/+)
( )
()
DISC
SET
DISC
SET
()
\
Note!!
You cannot change the discs stored in the CUSTOM file. Likewise,
you cannot erase just one disc from the CUSTOM file.
÷ Pressing DISC (–/+) during CUSTOM playback lets you choose
among other discs stored in the CUSTOM file.
÷ If you use the digit buttons and DISC SET on the remote control
during CUSTOM playback to choose a disc not stored in the
CUSTOM file, NO DISC” will be displayed for approximately
3 seconds.
÷ When a disc appointed to the CUSTOM file is not loaded in the
rack, NO DISC” is displayed for approximately 3 seconds,
the disc is erased from memory, and CUSTOM searches for the
next disc.
÷ The discs stored in the CUSTOM file will not be erased when you
turn off the power.
÷ Items stored in memory are saved, even if the power cord is
unplugged.
(Memory Back-Up Function).
÷ While the hood is open, DISC (–/+) cannot be used for CUSTOM
file entry.
Erasing all the discs from the each CUSTOM
file.
Press MODE to choose CUSTOM, then press the CLEAR
button.
TRACK MIN SECDISC
CUSTOM
ROMALL BEST
ADLC CD TEXT
SCANDISC
REPEAT REMAINPGM 1
PREVIOUSSINGLE
TRACK MIN SECDISC
CUSTOM
CUSTOM
TRACK MIN SECDISC
TRACK MIN SECDISC
CUSTOM
TRACK MIN SECDISC
CUSTOM
DISC
+
MODE
DISC
+
MODE
6
( = )
÷ The disc title can be registered even during checking the discs in
the custom file. [Page 19] However, it is not possible to register
the disc title if the disc number is blank.
Checking the numbers of the stored discs.
Press TIME repeatedly (3 times) during stop mode so that the display
changes as shown below.
Press DISC(–/+). Each time you press DISC(–/+), a disc number
stored in the CUSTOM file is displayed. When all the disc numbers
have been displayed, the disc number changes to a blank.