Filter
Top Products
English
2
Thank you for buying this Pioneer product.
Please read through these operating instructions before using
your speaker system so you will know how to make the
most of its performance. After you have finished reading the
instructions, put them away in a safe place for future
reference.
WARNING:
Handling the power cord on this product or cords associated
with accessories sold with the product will expose you to
lead, a chemical known to the State of California and other
governmental entities to cause cancer and birth defects or
other reproductive harm.
Wash hands after handling.
CAUTION
This product is designed exclusively for use with the Pioneer
Plasma Display. For more information on compatibility, please
consult with your nearest Pioneer authorized dealer or service
center.
BEFORE USE
÷ The nominal impedance of this speaker system is 8 ohms.
÷ In order to prevent damage to the speaker system
resulting from input overload, please observe the
following precautions:
÷ Do not supply power to the speaker system in
excess of the maximum permissable input. This can
result in damage or a possible fire hazard.
÷ When connecting or disconnecting pin-plugs, be
sure that amplifier power is OFF.
÷ When using a graphic equalizer to emphasize loud
sounds of a high frequency range, do not use
excessive amplifier volume.
÷ Do not force a low-powered amplifier to produce a
loud volume of sound (the amplifier’s harmonic
distortion will be increased, and you may damage
the speaker).
÷ Please handle the speakers with sufficient care, as
the grille net and the cabinet can become damaged
or broken when they are subjected to strong external
impacts.
÷ Placing a CRT computer screen or CRT monitor near to
the speakers may result in interference or color distortion.
If this happens, distance the monitor from the speakers.
Installation
÷ Consult your dealer if you encounter any difficulties
with this installation.
÷ Pioneer is not liable for any damage resulting from
improper installation, improper use, modification, or
natural disasters.
CHECKING THE ACCESSORIES
7 Speaker Cable × 2
7
Speakers Mounting Screw (M5 × 10 mm: Black) × 16
7 Speaker Mounting Bracket
For LEFT-TOP
For LEFT-BOTTOM
For RIGHT-TOP
For RIGHT-BOTTOM
7 Padding Strip × 2
(For Flush mounting)
When speakers are mounted Flush, they are affixed to
the side of the speaker as a buffer.
7 Operating Instructions × 1
There are two ways to mount these speakers,
either Air mount or Flush mount.
7 Air mount
There is a gap of air of about 15 mm between the speakers
and the display.
Speakers
7 Flush mount
The speakers are direct against the display.
Speakers
CAUTION:
÷
Do not place force on the speakers’ front panel grille net,
or stick your finger or other object into the front of the
speaker, since you may damage the grille net or speaker
unit itself.
÷
Do not use these speakers with anything other than the
Plasma Display. Doing so may result in damage or fire.
SRD1293A_01-07/En 6/16/05, 6:01 PM2