Filter
Top Products
10
En
RANDOM PLAYBACK - TO PLAY ALL TRACKS
IN RANDOM ORDER
Press the RANDOM button. All tracks on all discs are played
in a random order. To play tracks other than the deleted tracks
in a random order, press the RANDOM button after carrying
out the Delete Program procedure. See “Delete Program
Playback” on page 13.
When the Hl-LlTE button is pressed once during stop mode,
playback starts from a point 1 minute after the beginning of
the first track, and the first track of each disc is played for
about 10 seconds. The DISC SCAN indicator blinks during
Disc Scan mode. After the first tracks of all discs are scanned,
the player enters stop mode.
When the Hl-LlTE button is pressed twice during stop mode,
playback starts from a point 1 minute after the beginning of
the track, and each track is played for about 10 seconds. The
SCAN indicator blinks during Track Scan mode. After all tracks
of all discs are scanned, the player enters stop mode.
To exit Magazine Hi-Lite Scan mode:
Press the 7, 6 or DISC NUMBER (DISC 1-DISC 6) button.
When the 6 button is pressed, normal playback starts from
the current point. When the DISC NUMBER (DISC 1-DISC 6)
button is pressed, the selected disc is played from the
beginning.
MAGAZINE HI-LITE SCAN
During stop mode
RANDOM
HI-LITE
Timer playback:
By using a commercially available audio timer, it is possible
to initiate playback at any time automatically.
1. Insert a magazine into the magazine slot.
2. Set the time at which you wish playback to begin.
The timer will supply power to both the amplifier and the
player at the preset time, turning all the components on
and initiating the playback mode. Playback starts from the
first track on the first disc.
Cautions:
÷ Do not unplug the power cord or do not turn off the
power with an audio timer during playback, as this
could result in damage to the disc.
÷ If a power failure occurs while the power is turned off
(standby mode), the power is automatically turned on
with the timer playback function when the power is
restored.
THEREFORE, DISCONNECT THE AC POWER CORD WHEN
THE PLAYER IS NOT USED FOR A LONG PERIOD OF TIME.
VARIOUS OPERATIONS
HI-LITE
(PD-M427 only)
(PD-M427 only)
RANDOM
NOTES:
÷
Hi-Lite Scan can be carried out from the desired elapsed
time of the track. During playback, press the HI-LITE
button at the point you want to start Hi-Lite Scan playback.
The player memorizes the minute and second of the point
and Track Scan playback is carried out from the memorized
point on each track.
÷
Each time the HI-LITE button is pressed, the mode switches
between Disc Scan and Track Scan.
÷
Programming of only desired tracks is possible during Track
Scan playback. See “Direct program” on page 12.
÷
During Track Scan playback, you can skip to the desired
track with the
4
1
button or
¡
¢
button.
÷
When the REPEAT button is pressed, Hi-Lite Scan playback
will be repeated.
÷
When playback time of a track is less than one minute or is
shorter than the memorized time, Hi-Lite Scan playback is
carried out from the beginning of the track for about 10
seconds. When playback time of a track is less than 10
seconds, the track is played from the beginning to the end.