Filter
Top Products
Getting started 04
13
En
English
Deutsch Italiano EspañolFrançais
Nederlands
FAQ
• Why can’t I hear SACD audio through the
digital outputs?
SACD audio is only available through the
analog outputs. This is not a malfunction.
Other playback features
The following features allow you to customize
the playback order. Note that these features
are not available with data discs (containing
WMA/MP3 files).
Using repeat play
There are two repeat play options available
during playback.
• During playback, press
REPEAT
to select a
repeat play mode.
Select between 1-track repeat (REPEAT lights
in the display), all repeat (ALL REPEAT lights in
the display), or repeat off.
• It’s also possible to use ‘all’ repeat play
together with program play (see Creating a
program list below).
Using random play
Use the random play feature to play tracks at
random. You can set the random play option
when a disc is playing or stopped.
1
•Press
RANDOM
to start random play.
Random play remains in effect (RANDOM
shows in the display) until you press (or
RANDOM again) to cancel.
Tip
• Use the following controls during random
play:
Creating a program list
This feature lets you program the play order of
tracks on a disc.
2
1 While stopped, press
PROGRAM
.
2 Use the number buttons and
ENTER
to
select a track for the current step in the
program list.
If you accidently enter the wrong track, press
CLEAR to delete it.
3 Repeat step 2 to build up a program list.
A program list can contain up to 24 tracks.
4 To play the program list, press
(play).
Program play remains active (PGM shows in
the display) until you stop playback (press
(play) after (stop) to start normal playback).
•Press PROGRAM then (play) to restart
program play.
• To add more tracks to the program list,
repeat steps 1 and 2.
• When the disc is stopped, press
PROGRAM
then CLEAR to erase one track
at a time (from the end of the list), or simply
press CLEAR to erase all tracks.
Skips to the next track.
Numbers
(not available
with MP3/
WMA data
discs)
Use to enter a track number. Press
ENTER to select.
• If the disc is stopped, playback
starts from the selected track.
• If the disc is playing, playback
jumps to the start of the selected
track.
Note
1 You can't use random play together with program play.
Button What it does
Button What it does
Selects a new track at random.
Returns to the beginning of the
current track.
2 You can't program pauses, or use program play together with random or 1-track repeat play.
PD-D6-J_MY.book Page 13 Friday, September 8, 2006 4:25 PM