Filter
Top Products
10
En
3
\
3
=
3
()
Press DISC SET.
Repeat steps 2 and 3 to
store other discs.
VARIOUS OPERATIONS
Checking the numbers of the stored discs.
Press TIME repeatedly (3 times) during stop mode so that
the display changes as shown below.
Press DISC (–/+). Each time you press DISC (–/+), a disc
number stored in the CUSTOM file is displayed. When all
the disc numbers have been displayed, the disc number
changes to a blank.
Erasing all the discs from the each CUSTOM
file.
Press MODE to choose CUSTOM, then press the CLEAR
button.
Note!!
You cannot change the discs stored in the CUSTOM file. Likewise,
you cannot erase just one disc from the CUSTOM file.
¶ Pressing DISC (–, +) during CUSTOM playback lets you choose
among other discs stored in the CUSTOM file.
¶ If you use the digit buttons and DISC SET on the remote control
during CUSTOM playback to choose a disc not stored in the
CUSTOM file, “**- no dISC” will be displayed for approximately
3 seconds.
¶ The discs stored in the CUSTOM file will not be erased when you
turn off the power.
¶ When a disc appointed to the CUSTOM file is not loaded in the
rack, “**- no dISC” is displayed for approximately 3 seconds, the
disc is erased from memory, and CUSTOM searches for the next
disc.
To program and play only the discs
you want to hear (CUSTOM playback)
This unit lets you program up to 25 of your favorite discs. For
example, you can store all the discs of your favorite artist, or some
other group of personal selections, and play only those discs.
You can even add other discs to the custom later on.
Operation example) Storing discs 3 and 12 in the CUSTOM
ΙΙΙΙ
ΙΙΙΙ
ΙΙ
file.
÷ If some disc number appears, press CLEAR.
÷ If you use DISC (–, +) to select a disc, it will be programmed
automatically after approximately 2 seconds.
( )
During stop mode, press
MODE so that the CUSTOM
ΙΙΙΙ
ΙΙΙΙ
ΙΙ indicator lights.
Use the digit buttons to
select disc.
( )
VARIOUS OPERATIONS
3
CLEAR
CUSTOM
CUSTOM
1 2
\
()
3
DISC (–, +)
Digit buttons
MODE
DISC SET
CLEAR
÷ You can operate PD-F507 by remote control unit and also by the
main unit.
÷ You can operate PD-F407 by the main unit.
÷ The parenthesis ( ) show operations for the main unit.
DISC (–, +)
MODE
Press MODE to select
CUSTOM and press 3.
Playback starts from the lowest disc
No.
PRE1297-A/En/09-15 04.1.6, 11:33 AM10