Pioneer HTZ282DVD-AP Home Theater System User Manual


 
Additional information13
56
En
Bluetooth connection
Error Messages
No picture or sound. • If the problem still persists when connecting your HDMI component directly to your
monitor, please consult the component or monitor manual or contact the
manufacturer for support.
No HDMI audio output. • See Switching the HDMI audio setting on page 41 to make sure that TV is
selected.
KURO LINK does not
function.
• Verify that the HDMI cable is firmly connected.
• Make sure that this unit’s KURO LINK mode is set to LINK ON (page 45).
• Check whether the connected component supports KURO LINK or not. For more
information refer to the operating manual of your flat screen TV.
• KURO LINK may not work properly if a SCART cable and an HDMI cable are
connected simultaneously. Set KURO LINK mode to LINK OFF when connecting
SCART and HDMI cables simultaneously.
Your TV automatically
change inputs.
• The connected TV automatically may change inputs in response to this unit
starting playback DVD or having the GUI screen (ex. Disc Navigator) displayed, etc. If
you do not want your TV to change inputs in this way, set this unit KURO LINK mode
to LINK OFF (page 45).
Problem Remedy
Problem Remedy
The Bluetooth wireless
technology device
cannot be connected or
operated. Sound from
the Bluetooth wireless
technology device is not
emitted or the sound is
interrupted.
• Check that no object that emits electromagnetic waves in the 2.4 GHz band
(microwave oven, wireless LAN device or Bluetooth wireless technology apparatus)
is near the unit. If such an object is near the unit, set the unit far from it. Or, stop
using the object emitting the electromagnetic waves.
• Check that the Bluetooth wireless technology device is not too far from the unit
and that obstructions are not set between the Bluetooth wireless technology device
and the unit. Set the Bluetooth wireless technology device and the unit so that the
distance between them is less than about 10 m and no obstructions exist between
them.
• Check that the Bluetooth ADAPTER and the ADAPTER PORT of the unit are
correctly connected.
• The Bluetooth wireless technology device may not be set to the communication
mode supporting the Bluetooth wireless technology. Check the setting of the
Bluetooth wireless technology device.
• Check that pairing is correct. The pairing setting was deleted from this unit or the
Bluetooth wireless technology device. Reset the pairing.
• Check that the profile is correct. Use a Bluetooth wireless technology device that
supports A2DP profile and AVRCP profile.
Message Description
EXTRAPWR • You cannot adjust SFC modes, tone controls (bass, treble, and bass boost),
MP3 Expander mode, Voice Enhancer mode when using Extra Power mode
.
CANNOT • Operation is prohibited because DVD/CD or USB isn’t selected, or
SHIFT
+KARAOKE, SHIFT+ECHO, SHIFT+ or SHIFT+ has been pressed.
• Appears when DVD/CD is not selected and SHIFT+USB REC is pressed.
TRAYLOCK • The tray lock is on. See General in Troubleshooting on page 53.
HTZ180_181_280_282DVD_En.book 56 ページ 2009年3月13日 金曜日 午後2時50分