Filter
Top Products
18
19
Saving favorite channels into presets
Your AirWare can store up to 30 of your favorite channels
as presets. The presets are organized into three banks
(A, B, or C) that each contain 10 presets.
TO SAVE A CHANNEL INTO A PRESET:
1. Tune to the channel
using the dial or by
entering the channel
number.
2. Press the “
pre/dir”
button until “PRESET
A,” “PRESET B,” or
“PRESET C” appears in
the display.
3. Press and hold a
number key to save that channel into that preset. For
example, by pressing and holding the
“3” key, you
can save channel 45 into the “A-3” preset. Use the
“0” key for the tenth preset.
TO RECALL A PRESET:
1. Press the “
pre/dir” button until “PRESET A,”
“PRESET B,” or “PRESET C” appears in the display.
2. Press the number key corresponding to your desired
preset. In the example, press the “
3” key and your
AirWare should tune to channel 45.
You can use the preset banks to organize your channels
in different ways. You might want to store your favorite
channels in bank A, and someone else’s favorite channels
in bank B. Or store music channels in one bank, news
and talk channels in another.
Storing song information in memory
Ever hear a song and later forget the artist’s name or
song title? Let your AirWare remember for you.
TO STORE A SONG’S INFORMATION IN MEMORY: Press
and release the “
memo” button while the song or program
is playing. Your AirWare will beep to confirm.
TO RECALL A SONG’S INFORMATION FROM MEMORY:
Press and hold the “
memo” button until your AirWare beeps
and you see “Memory Recall” in the display. If you have
stored more than one song’s information, you can rotate
the dial to view each entry.
Your AirWare can hold up to 20 entries, after which any
new entry replaces the oldest entry in memory.
TuneSelect™: Always find your favorite songs
or artists
If you can’t get enough of a certain artist or song,
your AirWare can tell you when it’s being played on any
XM channel.
1. Press the “
menu” button and choose the
“TuneSelect” option.
2. Choose either “Select by Song” or “Select by Artist.”
“Select by Song” finds a song or program by its title;
“Select by Artist” searches using the artist’s name.
3. When you hear one of your favorite songs or artists,
press in and hold the dial. Your AirWare will beep and
flash “Song Selected” or “Artist Selected” on the
display. This signals that your chosen song title or
artist name is saved in the TuneSelect list. The list
holds up to 20 entries (either artist names or song
titles); when the list is full, any new entry replaces the
oldest song title or artist in the list.
4. When any song or artist on the list is currently playing
on any other XM channel, your AirWare will beep and
flash “Artist/Song Found” on the screen. Switch to
that channel by pressing in the dial.
5. You may erase individual song titles or artists from the
list, or all the songs and artists. Using the “
menu”
button and dial, choose the “TuneSelect” option and
then s
elec
t either “Erase All” or “Erase Some.” Follow
the instructions on your AirWare’s display.
user_gd_engfinl6.r5.qxd 3/29/05 7:50 PM Page 18