Filter
Top Products
• To cancel a Road Traffic Flash or Transport Flash interruption and return
to the original source, press the TA button during an Announcement inter-
ruption.
Note:
• You can also switch in order between interrupting Announcements. (Refer to “Switching
Interrupting Announcements” on page 64.)
7 TP Alarm function
When the following conditions arise, the “3TRAFFIC” indicator turns to “T”, and after 30
seconds, the TP Alarm beeps for 10 seconds, reminding you to select a Service Component
supporting Road Traffic Flash and Transport Flash.
• When Road Traffic Flash and Transport Flash interruption setting is ON.
• When the Service Follow Function is ON.
• When this unit (during DAB reception) cannot clearly receive a Service Component
supporting Road Traffic Flash and Transport Flash.
• When this unit RDS cannot receive a TP or enhanced other network’s TP station broad-
cast.
• When listening to a DAB broadcast, after hearing the TP Alarm, you should
re-tune to a Service that supports Road Traffic Flash and Transport Flash if
you want to continue the possibility to receive them.
When listening to any other sources, 30 seconds after the “3TRAFFIC” indicator turns to
“T”, search automatically starts for a Service Component in that area that supports Road
Traffic Flash and Transport Flash.
62
DAB Tuner Operation