Filter
Top Products
Setting the FM tuning step
Normally the FM tuning step employed by
seek tuning is 50 kHz. When AF or TA is on,
the tuning step automatically changes to 100
kHz. It may be preferable to set the tuning step
to 50 kHz when AF is on.
1 Use MULTI-CONTROL to select FM.
The function name tag FM is highlighted.
2 Press MULTI-CONTROL to select the FM
tuning step.
Pressing MULTI-CONTROL repeatedly will
switch the FM tuning step between 50 kHz
and 100 kHz while AF or TA is on. The selected
FM tuning step will appear in the display.
Note
The tuning step remains at 50 kHz during manual
tuning.
Switching Auto PI Seek
The unit can automatically search for a differ-
ent station with the same programming, even
during preset recall.
1 Use MULTI-CONTROL to select A-PI.
The function name tag A-PI is highlighted.
2 Press MULTI-CONTROL to turn Auto PI
seek on.
Auto PI:ON appears in the display.
# To turn Auto PI seek off, press
MULTI-CONTROL again.
Switching the warning tone
If the front panel is not detached from the
head unit within five seconds of turning off the
ignition, a warning tone will sound. You can
turn off the warning tone.
1 Use MULTI-CONTROL to select WARN.
The function name tag WARN is highlighted.
2 Press MULTI-CONTROL to turn warning
tone on.
Warning tone :ON appears in the display.
# To turn warning tone off, press
MULTI-CONTROL again.
Switching the hands-free
telephoning
You can turn the hands-free telephoning on or
off in accordance with the connection of the
cellular telephone you use. When using the
hands-free telephone unit (sold separately), se-
lect Hands-Free:ON.
1 Use MULTI-CONTROL to select TEL 1.
The function name tag TEL 1 is highlighted.
2 Press MULTI-CONTROL to turn the
hands-free telephoning on.
Hands-Free:ON appears in the display.
# To turn the hands-free telephoning off, press
MULTI-CONTROL again.
Switching the telephone
standby
If you want to use the hands-free telephone
unit without playing other sources of this unit,
activate the telephone standby mode.
! When the hands-free telephoning is
Hands-Free:ON, you can operate this
function.
Initial Settings
En
70
Section
13