Filter
Top Products
Searching for service by
available PTY information
Available PTY search lets you see the list of
available PTYs that is in the current ensemble
and select one of them to receive.
! If there is no available PTY in the current
ensemble, you cannot switch to the avail-
able PTY search mode.
! Available PTY search is different from PTY
search. With this unit, you can operate only
the available PTY search.
1 Use MULTI-CONTROL to select PTY.
The function name tag PTY is highlighted.
2 Push MULTI-CONTROL left or right to
select a program type.
3 Press MULTI-CONTROL to begin the
search.
DAB receives the desired PTY service.
Notes
! The PTY method displayed is narrow. The wide
method cannot be selected when using DAB
as source.
! If no service broadcasting the selected pro-
gramming type is found, Not Found is dis-
played for about two seconds and then the
DAB returns to the previous service.
Using dynamic label
Displaying dynamic label
1 Press DISPLAY and hold to display dy-
namic label.
# You can cancel dynamic label display by
pressing DISPLAY or BAND/ESC.
# When no dynamic label is currently being re-
ceived, NO TEXT is displayed.
2 Push MULTI-CONTROL left or right to
recall the three most recent dynamic labels.
Pushing MULTI-CONTROL left or right
switches between the current and the three
dynamic label data displays.
# If there is no dynamic label data in memory
the display will not change.
3 Turn MULTI-CONTROL to scroll.
Turn MULTI-CONTROL counterclockwise to go
to the beginning. Turn MULTI-CONTROL
clockwise to scroll the dynamic label data.
# You can also perform the same operations by
pushing MULTI-CONTROL up or down.
Storing and recalling dynamic
label
You can store data from up to six dynamic
label transmissions at buttons 16.
1 Display the dynamic label you want to
store in memory.
Refer to Displaying dynamic label on this page.
2 Press any buttons 16 and hold to store
the selected dynamic label.
The memory number will display and the se-
lected dynamic label will be stored in memory.
The next time you press the same button in
the dynamic label display the stored text is re-
called from memory.
Selecting services from the
preset service list
Preset service list lets you see the list of preset
services and select one of them to receive.
1 Turn MULTI-CONTROL to switch to the
preset service list mode.
2 Use MULTI-CONTROL to select the de-
sired service.
Turn to change the service; press to select.
# You can also change the service by pushing
MULTI-CONTROL up or down.
# To store the currently received service in mem-
ory, press and hold MULTI-CONTROL until the
selected preset number stops flashing.
# To return to the frequency display, press
BAND/ESC.
DAB tuner
En
47
English
Section
09