Filter
Top Products
Wired remote input
Hard-wired remote control
adaptor can be connected (sold
separately).
++
≠≠
++
++
≠≠
≠≠
+
≠
+
≠
+
≠
+
≠
Power amp
(sold separately)
Subwoofer
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Orange/white
Connect to lighting switch terminal.
Connect with RCA cables
(sold separately)
Rear speaker
Perform these connections when
using the optional amplifier.
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio
Mute lead on that equipment. If not, keep the Audio Mute lead free of any
connections.
Black (chassis ground)
Connect to a clean, paint-free metal location.
1.5 m (4 ft. 9 in.)
System remote control
Front speaker Front speaker
Left Right
Rear speaker
Subwoofer
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Front speaker Front speaker
Rear speaker Rear speaker
White Gray
Gray/blackWhite/black
Green Violet
Green/black Violet/black
Power amp
(sold separately)
Power amp
(sold separately)
IP-BUS input (Blue)
IP-BUS cable
Multi-CD player
(sold separately)
Use a stereo mini plug cable
to connect with auxiliary
equipment.
Rear output
Front output
Antenna jack
Subwoofer output
AUX jack (3.5 ø)
16 cm (6-1/4 in.)
USB cable
Connect the USB portable audio
player or USB memory (sold
separately).
Fuse resistor
Fuse resistor
Fuse (10 A)
This product
20 cm (7-7/8 in.)
Connecting the Units
7 When not connecting a rear speaker lead to a Subwoofer