Filter
Top Products
# Your phone should now be temporarily con-
nected; however, to make best use of the technol-
ogy, we recommend you register the phone to
this unit.
2 Registration
Refer to Registering connected cellular phone
on page 49 for instructions on how to register
your temporarily connected phone.
3 Volume adjustment
Adjust the earpiece volume on your cellular
phone for comfort. When adjusted, the volume
level is memorized in this unit as the default
setting.
# Caller’s voice volume and ring volume may
vary depending on the type of cellular phones.
# If the difference between the ring volume and
caller’s voice volume is big, overall volume level
may become unstable.
# Before disconnecting cellular phone from this
unit, make sure to adjust the volume to proper
level. If the volume has been muted (zero level)
on your cellular phone, the volume level of your
cellular phone remains muted even after the cel-
lular phone is disconnected from this unit.
Making a phone call
Voice recognition
1 Press BAND and hold until Voice dial
appears in the display.
Voice dial appears in the display. When
Voice dial ON is displayed, voice recognition
function is now ready.
# If your cellular phone does not feature voice
recognition function, No voice dial appears in
the display and opearation is not available.
2 Pronounce the name of your contact.
Taking a phone call
Answering an incoming call
1 When a call comes in, push
MULTI-CONTROL up.
# If the private mode is selected on the cellular
phone, hands-free phoning may not be per-
formed.
2 To end the call, push MULTI-CONTROL
down.
The estimated call time appears in the display
(this may differ slightly from the actual call
time).
Rejecting an incoming call
% When a call comes in, push
MULTI-CONTROL down.
The call is rejected.
Answering a call waiting
1 Push MULTI-CONTROL up to answer a
call waiting.
# Pushing MULTI-CONTROL up switches be-
tween callers on hold.
2 Push MULTI-CONTROL down to end all
calls.
Pushing MULTI-CONTROL down ends all calls
including a call waiting on line.
# The caller you have been talking to is now on
hold. To end the call, both you and your caller
need to hang up the phone.
# While your callers hold the line, pushing
MULTI-CONTROL up switches between callers.
Rejecting a call waiting
% Push MULTI-CONTROL down to reject a
call waiting.
Available accessories
En
47
English
Section
03