Filter
Top Products
Multi-DVD Player
29
Scan Play
Scan Play plays the first 10 seconds or so of each track on a CD in succession.
1. Select “Scan” by moving the joystick.
“Scan” is highlighted in green.
2. Switch the Scan Play On by clicking the joy-
stick.
3. When you find the desired track, cancel the
Scan Play by clicking the joystick.
If the Function Menu has been canceled automatically,
select the “Scan” in the Function Menu again.
Note:
• Scan Play is canceled automatically after all the tracks on a disc have been scanned.
ITS Play
ITS Play plays the memorized track. (Refer to “ITS Programming (ITS)” on page 41.)
1. Select “ITS” by moving the joystick.
“ITS” is highlighted in green.
2. Click the joystick.
Each click toggles the ITS Play On/Off.
Note:
• If no track in the current range is programmed for ITS Play, “Empty” is displayed.
• For Multi-DVD, ITS play can be done only on the CD in play.
Source plate
ITS Play
Source plate
Scan