Pioneer AVH-X2500BT Stereo Receiver User Manual


 
1 Press the home buttonto switch to the
home display.
2 Touch the audiofunction key to open the
audio menu.
3 Touch Graphic EQon the audio function
menu.
# You cannotselect oradjust the equalizercurves
of Custom1and Custom2when using theauto-
equalizer.
4 Touch the desiredsetting.
S.BassPowerfulNaturalVocalFlat
Custom1Custom2
Adjusting the 8-band graphic
equalizer
You can adjust thelevel of each band forthe
equalizer curves.
! Aseparate Custom1 curve can becreated
for each source. Ifyou make adjustments
when a curve other thanCustom2 is se-
lected, the equalizercurve settings will be
stored in Custom1.
! ACustom2 curve that is commonfor all
sources can becreated. If you make adjust-
ments when the Custom2curve is selected,
the Custom2 curve will beupdated.
1 Press the home buttonto switch to the
home display.
2 Touch the audiofunction key to open the
audio menu.
3 Touch Graphic EQon the audio function
menu.
4 Touch the desiredsetting.
S.BassPowerfulNaturalVocalFlat
Custom1Custom2
5 Touch the tableto adjust the level ofthe
equalizer band.
Range: +12dB to12dB
Using the auto-equalizer
The auto-equalizer is anequalizer curve created
by auto EQ(refer to Auto EQ(auto-equalizing) on
page 40).
You can turn theauto-equalizer on or off.
If you connect anoptional microphone to this
unit, you canuse this function.
1 Press the home buttonto switch to the
home display.
2 Touch the audiofunction key to open the
audio menu.
3 Touch Auto EQto turn the auto-equalizer
on or off.
# You cannotuse thisfunction if autoEQ hasnot
been carriedout.
Using sonic center control
Sound that is suitedfor the listening position
can easily becreated with this function.
1 Press the home buttonto switch to the
home display.
2 Touch the audiofunction key to open the
audio menu.
3 Touch Sonic CenterControl on the audio
function menu.
4 Touch
or toselect a listening position.
Range: Left 7to Right 7
Adjusting loudness
Loudness compensates fordeficiencies in the
low-frequency and high-frequencyranges at low
volume.
1 Press the home buttonto switch to the
home display.
2 Touch the audiofunction key to open the
audio menu.
3 Touch c ord to select a desiredlevel for
loudness.
Off (off)Low(low)Mid (mid)High(high)
Using subwoofer output
This unit is equippedwith a subwoofer output
which can beturned on or off.
! Thecut-off frequency and outputlevel can be
adjusted when thesubwoofer output is on.
1 Press the home buttonto switch to the
home display.
2 Touch the audiofunction key to open the
audio menu.
3 Touch Subwoofer onthe audio function
menu.
4 Touch On orOff next to Subwooferto
turn the subwooferoutput on or off.
5 Touch Normal orReverse next to Phase
to select thephase of subwoofer output.
6 Touch c ord next to Level toadjust the
output level ofthe subwoofer.
Range: +6 to24
7 Touch c ord next to Frequency to select
the cut-offfrequency.
50Hz63Hz80Hz100Hz125Hz
Only frequencies lowerthan those in the se-
lected range areoutputted from the subwoofer.
Boosting the bass
You can boost thebass level.
1 Press the home buttonto switch to the
home display.
2 Touch the audiofunction key to open the
audio menu.
3 Touch c ord to select a desiredlevel.
Range: 0 to+6
Using the high pass filter
When you donot want low sounds fromthe sub-
woofer output frequencyrange to play from the
front or rear speakers,turn on the HPF (high
pass filter). Onlyfrequencies higher than those
in the selected rangeare output from thefront
or rear speakers.
1 Press the home buttonto switch to the
home display.
2 Touch the audiofunction key to open the
audio menu.
3 Touch c ord next to the frequencyto se-
lect cut-off frequency.
Off (off)50Hz63Hz80Hz100Hz
125Hz
Only frequencies higherthan those in the se-
lected range areoutput from the front orrear
speakers.
Audio adjustments
34
Section
Audio adjustments
En
18
<CRD4703-B/N>34