Pioneer A9 Stereo Receiver User Manual


 
Other connections06
24
En
Switching components on and
off using the 12 volt trigger
You can connect components in your system to
this receiver through a 12 volt trigger. If you
turn the power to a connected component on,
the power to this receiver is also turned on.
This receiver will not turn on if you turn a
connected component off while this receiver is
currently off.
1
Connect the 12V TRIGGER jack of this
receiver to the 12V trigger of another
component.
Use a cable with a mono mini-plug on each
end for the connection.
Note
1 When this system is already on, switching the connected component on will have no effect (switching the connected compo-
nent off will have no effect in any case).
P
R
O
U
FM UNBAL
75
12V
TRIGGER
SPEAKER R
12V
TRIGGER
A9_KU.book 24 ページ 2006年11月6日 月曜日 午後3時34分