Filter
Top Products
5
CONNECTIONS
\
NOTE:
Do not allow any of the cord conductors to protrude from the
terminals or touch any other conductors. Malfunctioning or
breakdowns may occur when conductors come into contact
with each other.
Speaker Impedance
The speaker systems used should have a rated impedance in
the range of 6 - 16 Ω.
CONNECTING THE SPEAKER CORDS
2. Loosen the knob and insert the wire core into the
terminal hole.
3. Tighten the knob to fix the wire core in place.
10mm
1. Strip off the vinyl covering and twist the tip of the
wire core.
CONNECTING THE INPUT/OUTPUT
CORDS
Connect the white plug to the L (left) channel, and the red plug
to the R (right) channel. Be sure to push the plugs securely.
L
R
Left channel
White plug
Right channel
Red plug
Twist the wire core
2
3
1