Filter
Top Products
7
Hum: Check for faulty phono connecting cable. Try to separate phono cables from power cords (they can
induce hum into the system). If that doesn't work we recommend you turn off your subwoofer when it is not
in use. This is most easily accomplished by either connecting its powercord to a switched power outlet on
the back of your receiver (if it has them) or by using a Remote Controlled Switched Outlet like Radio Shack
part #61-2667.
Subsonic
TM
, Baby Boomer
TM
, Baby Boomer Plus
TM
, Digital Sub
TM
600 & Supersonic
TM
Specifications:
Woofer(s) :
Subsonic
TM
: (2) 6.5" heavyweight fibercone woofers 2" voice coils and 30-ounce magnets
Baby Boomer
TM
& Baby Boomer Plus
TM
: (2) 8" heavyweight fibercone woofers with rubber surrounds,
2" voice coils and 40-ounce magnets
Digital Sub
TM
600 & Supersonic
TM
: (2) 12" heavyweight polycone woofer with rubber surrounds,
2” voice coils and 40-ounce magnets
Subwoofer Low End Frequency Response: Subsonic
TM
: -3 dB @ 28 Hz
Baby Boomer
TM
& Baby Boomer Plus
TM
: - 3 dB @ 27 Hz
Digital Sub
TM
600 & Supersonic
TM
: - 3 dB @ 23 Hz
Variable Subwoofer Low Pass Filter: Fourth Order from 50 - 150 Hz
System: Subsonic
TM
& Baby Boomer
TM
& Baby Boomer Plus
TM
- Acoustic Suspension / Bipole Configuration
Digital Sub
TM
600 & Supersonic
TM
- Compound Compression
Dimensions: Subsonic
TM
: 7 7/8" wide x 7 7/8" high x 7 7/8" deep (without grills)
Baby Boomer
TM
& Baby Boomer Plus
TM
: 9 7/8" wide x 9 7/8" high x 9 7/8" deep (without grills)
Digital Sub
TM
600 & Supersonic
TM
: 14 1/4" wide x 15" high x 15" deep (with grill)
Weight: Subsonic
TM
- 22 lbs. / Baby Boomer
TM
& Baby Boomer Plus
TM
- 30 lbs.
Digital Sub
TM
600 & Supersonic
TM
- 50 lbs.
Amplifier Power: Subsonic
TM
- 350 Watts
Baby Boomer
TM
& Digital Sub
TM
600 - 600 Watts
Baby Boomer Plus
TM
& Supersonic
TM
- 800 Watts
Power Requirements: AC 120 V, 60 Hz, 800 Watts Maximum