Piega SUB 1 MKII Speaker User Manual


 
Ideal setup:
>For both surround and stereo mode, position the P SUB 1 MKII
as close to the two front loudspeakers as possible
>The two chassis of the P SUB 1 MKII should face left and right
with the connection terminal facing the wall
>As the sound is directed from the sides of the chassis, only a
small clearance from the wall is required (approx. 30 cm)
>Do not in any way prevent the free movement of the P SUB 1 MKII
>Do not place any objects such as vases etc. on the P SUB 1 MKII
so as avoid the possibility of accidents
The P SUB 1 MKII can be installed exibly and easily. Due to its relatively small size, it can be integrated in any unit and can be
positioned as required virtually anywhere in the room. However, to ensure the most natural sound, the P SUB 1 MKII should be placed
on the oor near the two front loudspeakers.
PIEGA P SUB 1 MKII
Recommendations for ideal positioning...
Installation Instructions
6
Note:
Frequencies below 100 Hz cannot be localized by the human ear.
>The exact positioning of the P SUB 1 MKII is largely unnecessary...!
Surround mode
Stereo mode