Piega SUB 1 MKII Speaker User Manual


  Open as PDF
of 16
 
10
The AV receivers and power ampliers of some manufacturers feature separate MAIN IN and PRE OUT terminals. The preamplied
signal reaches the subwoofer and can be looped back again ltered. In this way the loudspeakers are relieved in the deep range in
order to ensure improved precision and sound characteristics. Refer to the appropriate manual for information about operation and
connecting options for your AV receiver/power amplier.
PIEGA P SUB 1 MKII
Conguration example for surround mode
Surround System with power amplier featuring MAIN IN/PRE OUT loop
Connecting the System
Benet:
Preferred conguration in the high end range
>The loudspeakers are relieved in the deep bass range...!
CROSSOVER
FREQUENCY
40Hz 140Hz
LFE / IN
INPUT
OUTPUT
LR
L+
L-
R+
R-
SPEAKER LEVEL INPUTS
60Hz
PRE OUTMAIN IN
L
R
Right Left
Front
Speaker R
Front
Speaker L
Center
Speaker
Rear
Speaker R
Rear
Speaker L
Amplifier
Connection:
>Connect the P SUB 1 MKII cable to the amplier terminal marked
PRE OUT (or similar) and to the subwoofer terminal marked INPUT
>Connect the P SUB 1 MKII cable to the amplier terminal marked
MAIN IN (or similar) and to the subwoofer terminal marked OUTPUT
>For this use two connection cables with cinch plugs
(not supplied with the loudspeakers)
>Connect the front, rear and center loudspeakers using the
loudspeaker terminals provided on your AV receiver
 previous next