Filter
Top Products
27
English
Switching to power-saving mode
In the power-saving Eco power mode, the set’s
Wi-Fi connection are turned off. The Center’s
harddisk also stops working. When you switch
Center to Eco power, it is impossible to move
music between Center and Station or import
music from PC to Center.
1 When the set is on, press and hold STANDBY-
ON/ ECO POWER to switch it to Eco
power (or y on the remote control)
➜ The display is switched off
2 To switch on, press and hold STANDBY-ON/
ECO POWER (or y on the remote control)
or press and hold SOURCE on the set
➜ The set switches to the last source selected
Helpful hints:
– In the standby/Eco power mode, the settings of
networking, sound, display, language and CD
recording, the tuner presets, and the volume level
(maximum: the moderate level) will be retained in
the set’s memory.
Auto-standby
● When the set has reached the end of playback/
recording and remains in the stop position for
more than 5 minutes, the set will switch to
standby automatically to save power.
Volume control
1 Check the playback starts
2 Adjust the volume with VOL +/- buttons
➜ Display shows the volume bar, indicating the
volume level
Basic functions
Switching to standby/on and
selecting functions
1 When the set is on, press STANDBY-ON/
ECO POWER to switch it to standby (or y
on the remote control)
➜ Display shows GoodBye. Then,
➜ The screen dims out.
2 To switch on, press STANDBY-ON/ ECO
POWER on the set
➜ The set switches to the last source selected
OR
On the remote control, press the source button
(e.g. HARDDISK, CD/MP3-CD, TUNER/
AUX, Center).
3 To select your function, press SOURCE once
or more on the set (or HARDDISK, CD/
MP3-CD, TUNER/AUX on the remote
control)
● On Station’s remote control, press Center to
select HD source (music stored on Center)
Helpful hints:
– CD/MP3-CD source is only available on Center.
p001-p051_WACS700_EngNEW2 9/16/2005, 09:0727