Philips WACS700 Speaker System User Manual


 
23
English
Installation
ETHERNET
75 FM ANTENNA
VOLTAGE
SELECTOR
NOT FOR ALL
VERSIONS
AUX
IN
R L
R L
LINE
OUT
LINE
OUT
R L
AUX IN
Center
D Connecting to an additional appliance
with powerful speakers
To enjoy the sound effect brought by powerful
speakers on an external appliance, e.g. a hi-fi mini
system, use red/white audio cables (not supplied)
to connect Center with the appliance.
1 Insert the red plug of the red/white audio cables
(not supplied) to the red socket LINE OUT R
and the white plug to the white socket
LINE OUT L
2 Connect the other end of the audio cables to
the AUX IN terminals of the additional
appliance
Using AC power
1 Make sure all the connections have been made
before switching on the power supply
2 Connect the AC power cord to the wall socket.
This switches on the power supply
When Center or Station is switched to standby,
it is still consuming some power. To disconnect
the system from the power supply
completely, remove the power plug from the
wall socket.
The type plate is located on the rear of the
set.
Setting up Wi-Fi connection
between Center and Station
Wi-Fi connection starts automatically when
you power up WAC700 Center and WAS700
Station
1 The first time you set up Wi-Fi connection,
place Center and Station side by side on a flat
and firm surface
2 First, connect the Center to power supply,
and then, connect the Station to power supply
Center/Station:
The screen lights up. Auto installation/
connection starts
You will enter HD (Harddisk) mode when
the installation/connection is finished
3 Relocate Center and Station as desired: plug
and stream
Simply unplug your Center or Station and
power them up in other rooms.
You will be able to stream the harddisk music
between Center and Station
Helpful hints:
Make sure you have powered up Center before
powering up Station.
IMPORTANT!
– Avoid thick walls. Your Center and Station
should never be blocked by 2 or more walls.
– Avoid placing the sets close to large metal
objects.
– Adjust the location of your Center and Station
according to the reception status of Wi-Fi signals.
– indicates maximum reception
– indicates minmum reception
– WACS700 do not support range expander
devices.
p001-p051_WACS700_EngNEW2 9/16/2005, 09:0723