Filter
Top Products
July 1994 2
Philips Semiconductors Product specification
2 x 22 W BTL stereo car radio power
amplifier
TDA1552Q
GENERAL DESCRIPTION
The TDA1552Q is an integrated class-B output amplifier in a 13-lead single-in-line (SIL) plastic power package.
The circuit contains 2 x 22 W amplifiers in Bridge Tied Load (BTL) configuration. The device is primarily developed for
car radio applications.
Features
• Requires very few external components
• High output power
• Low offset voltage at outputs
• Fixed gain
• Good ripple rejection
• Mute/stand-by switch
• Load dump protection
• AC and DC short-circuit-safe to ground and V
P
• Thermally protected
• Reverse polarity safe
• Capability to handle high energy on outputs (V
P
= 0 V)
• Protected against electrostatic discharge
• No switch-on/switch-off plop
• Low thermal resistance
• Flexible leads.
QUICK REFERENCE DATA
PACKAGE OUTLINE
13-lead SIL-bent-to-DIL; plastic power (SOT141R); SOT 141-6; 1996 July 23.
PARAMETER CONDITIONS SYMBOL MIN. TYP. MAX. UNIT
Supply voltage range
operating V
P
6.0 14.4 18.0 V
non-operating V
P
−−30 V
load dump protected V
P
−−45 V
Repetitive peak output
current I
ORM
−−4A
Total quiescent current I
tot
− 80 160 mA
Stand-by current I
sb
− 0.1 100 µA
Switch-on current I
sw
−−60 µA
Input impedance |Z
I
| 506075kΩ
Junction temperature T
j
−−150 °C
Stereo application
Output power R
L
= 4 Ω; THD = 10% P
o
20 22 − W
Supply voltage ripple
rejection R
S
= 0 Ω
f = 100 Hz to 10 kHz RR 48 −−dB
DC output offset voltage |∆V
O
| −−150 mV
Channel separation α 40 −−dB
Channel unbalance |∆G
v
| −−1dB