Filter
Top Products
19
English
3140 115 2xxx1
Specifications
AMPLIFIER
Output power .......................................2 x 10 W RMS
Signal-to-noise ratio..........................≥ 65 dBA (IEC)
Frequency response .........40 – 20000 Hz, ± 3 dB
Input sensitivity AUX ....................... 0.5 V (max. 2 V)
Impedance loudspeakers ......................................... 8 Ω
Impedance headphones ....................32 Ω -1000 Ω
CD PLAYER
Frequency range .................................. 20 – 20000 Hz
Signal-to-noise ratio............................................75 dBA
TUNER
FM wave range ...................................87.5 – 108 MHz
AM wave range.................................. 530 – 1700 kHz
Sensitivity at 75 Ω
– mono, 26 dB signal-to-noise ratio ............ 2.8 µV
– stereo, 46 dB signal-to-noise ratio ........ 61.4 µV
Selectivity ................................................................. ≥ 28 dB
Total harmonic distortion..................................... ≤ 5%
Frequency response ..... 63 – 12500 Hz (± 3 dB)
Signal-to-noise-ratio ...................................... ≥ 50 dBA
Maintenance
Cleaning the Cabinet
¶ Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
¶ When a disc becomes dirty,
clean it with a cleaning cloth.
Wipe the disc from the center
out.
¶ Do not use solvents such as
benzine, thinner, commercially
available cleaners, or antistatic
spray intended for analog records.
Cleaning the disc lens
¶ After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.
Cleaning the Heads and the Tape Paths
¶ To ensure good recording and playback quality,
clean the heads A, the capstan(s) B, and
pressure roller(s) C after every 50 hours of
tape operation.
¶ Use a cotton swab slightly moistened with
cleaning fluid or alcohol.
¶ You can also clean the heads by playing a
cleaning tape once.
A A B C
Demagnetizing the heads
¶ Use a demagnetizing tape available at your
dealer.
TAPE DECK
Frequency response
Normal tape (type I)......80 – 12500 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I).................................... 50 dBA
Wow and flutter......................................... ≤ 0.4% DIN
SPEAKERS
Bass reflex system
Dimensions (w x h x d) .155 x 224 x 250 (mm)
.................................................. 6.10 x 8.82 x 9.84 (inch)
GENERAL INFORMATION
AC Power...................................................120 V / 60 Hz
Dimensions (w x h x d) ..140 x 228 x 262 (mm)
................................................5.51 x 8.98 x 10.31 (inch)
Weight (with/without speakers) ..................................
...............................................................approx. 8.4 / 3.3 kg
.............................................approx. 18.48 / 7.26 pound
Standby power consumption..........................< 3 W
Subject to modification
pg 001-021/MC30/37-Eng 12/8/00, 9:09 AM19