Filter
Top Products
18
English
3140 115 2xxx1
Clock/Timer
TUNING
CLOCK
SIDE A/B
VOLUME
SHUFFLE
SOURCE
TIMER ON•OFF PROGRAM
REPEAT
REV MODE/BAND
STANDBY-ON
RECORD
MC
-
30 MICRO SYSTEM
iR
FWD á/ë
REW à /í
PRESET
STOP
PLAY•PAUSE
Setting the clock
1 In standby, press CLOCK.
➜ The clock digits for the hours flash.
2 Tur n VOLUME to set the hours: clockwise for
hours up; counter-clockwise for hours down.
3 Press CLOCK again.
➜ The clock digits for the minutes flash.
4 Tur n VOLUME to set the minutes: clockwise for
minutes up; counter-clockwise for minutes down.
5 Press CLOCK to confirm the time.
Setting TIMER
¶ The system can be used as an alarm clock,
whereby the CD, TUNER or TAPE is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
¶ You can also use it to record a favorite tuner
program at a set period (REC TUN, see TAPE
RECORDER)
¶ During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1 In any mode, press TIMER ON•OFF for more
than 2 seconds.
2 Tur n VOLUME clockwise to select sound
source.
➜ Display sequence shows CD, TUNER, TAPE
or REC TUNER.
3 Press TIMER ON•OFF to confirm your
desired mode.
➜ The selected source , or RECORD is
shown.
Display sequence scrolls SET ON TIME and
flashes. The clock digits for the hours flash.
4 Tur n VOLUME to set the hours: clockwise for
hours up; counter-clockwise for hours down.
5 Press TIMER ON•OFF again.
➜ The clock digits for the minutes flash.
6 Tur n VOLUME to set the minutes: clockwise for
minutes up; counter-clockwise for minutes down.
7 Press TIMER ON•OFF to confirm the time.
➜ The timer is now set and activated.
Activating and deactivating
TIMER
¶ In standby or during playback, press TIMER
ON•OFF on the system once (TIMER on the
remote control).
➜ Display shows if activated, and
disappears if deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time. The clock time
needs to be set first before the sleep timer can
be used.
¶ Press SLEEP on the remote
control once or more.
➜ Display shows SLEEP and
one of the sleep time options
in sequence: 60, 45, 30,15,
SLEEP OFF, 60... if you have selected a time.
Once SLEEP is activated, SLEEP ON scrolls
across the display at repeated intervals.
¶ To deactivate, press SLEEP on the remote
control once or more until SLEEP OFF is
shown, or press STANDBY-ON on the system
or remote control.
TUNERAPE
SLEEP
U
X
S
C
INC. SURR
pg 001-021/MC30/37-Eng 12/8/00, 9:09 AM18