Filter
Top Products
15
English
Step 3: Connecting to TV
This connection enables you to view the
playback from this DVD system. You only
need to choose one of the options
below to make the video connection.
– For a standard TV, follow option 1 or
2.
– For a progressive scan TV, follow
option 3.
– For a HDMI TV, follow option 4.
– For TV with only a single antenna
input jack, follow option 5.
IMPORTANT!
Connect the DVD system directly
to the TV.
Helpful Hint:
– To hear the TV channels through this DVD
system, connect the AUDIO IN - TV IN jacks
to the corresponding AUDIO output jacks on
the TV using an audio cable. Press TV on
the remote control when watching the TV
programs.
Basic Connections (continued)
Option 1: Using the Video (CVBS)
jack (good picture quality)
Use the supplied composite video cable
(yellow) to connect the CVBS jack on
the DVD system to the video input jack
(or labeled as A/V In, Video In,
Composite or Baseband) on the TV.
Option 2: Using the S-Video jack
(excellent picture quality)
Use an S-video cable (not supplied) to
connect the S-VIDEO (Y/C) jack on the
DVD system to the S-Video input jack
(or labeled as Y/C or S-VHS) on the TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
FM 75
AM
FM/AM ANTENNA
HDMI OUT
~
MAINS
R
L
SUB-
WOOFER
FRONT
LEFT
FRONT
RIGHT
Option 1
Option 2