Philips P88 Stereo System User Manual


 
15
English
3139 116 19721
Personal Setting
You can adjust the personal setting to your
desired level with the JOG control.
1 Press and hold PERSONAL for about
5
seconds
to switch on the personal
setting mode.
"SELECT PRESET NUMBER"
will be displayed.
2 Adjust the JOG to select the desired
preset number for personal setting and
press á to confirm the selection.
"ADAPT LOW FREQ LEVEL" will
be displayed.
3 Adjust the JOG to select the desired
Spectrum Analyzer band level for low
frequency.
The level will increase or decrease
between+3 and -3.
4 Press á to confirm the selection.
"ADAPT MID FREQ LEVEL" will
be displayed and the next followed
by "ADAPT HIGH FREQ
LEVEL".
Repeat
step 3 - 4
to select the desired
mid and high frequencies Spectrum
Analyzer band levels.
5 You can choose to edit the name for the
personal setting.
The first character of setting name
will be flashing.
6 Adjust the JOG to select the desired
alphabet, number or symbol.
"A to Z", "0 to 9" or "*, -, +, \, /, _".
7 Press á to confirm the selection.
The next character for editing will be
flashing.
Repeat
step 6 - 7
to store up to 10
characters.
8 To store the setting, press PERSONAL
again.
Before storing the setting, you can
press
à
to retrace the steps in the
reverse order.
To exit without storing the setting,
press
Ç
.
Notes:
During personal setting, if no button is
pressed within 90 seconds, the system
will exit personal setting mode
automatically.
wOOx level cannot be stored as part of
the personal setting.
It is not possible to adjust Bass/Treble
level during personal setting, "
USE
JOG
" will be displayed.
DIGITAL SOUND CONTROL (DSC)
The DSC feature enables you to adjust the
system to suit your type of music.
1 Press to select the DSC feature.
2 Adjust the JOG to select the desired
Digital Sound Control setting :
OPTIMAL, CLASSIC, TECHNO, VOCAL,
ROCK or JAZZ.
The selected digital sound is
encircled.
"OPTIMAL, CLASSIC, TECHNO,
VOCAL, ROCK or JAZZ" will be
displayed.
Note:
For neutral setting, select CLASSIC.
VIRTUAL ENVIRONMENT CONTROL
(VEC)
The VEC feature enables you to adjust the
system to select a type of environment.
1 Press to select the VEC feature.
2 Adjust the JOG to select the desired
Virtual Environment Control setting :
HALL, CLUB, DISCO, CINEMA,
CONCERT or ARCADE.
The selected environment is
encircled.
"HALL, CLUB, DISCO,
CINEMA, CONCERT or
ARCADE" will be displayed.
OPERATING THE SYSTEM
BASS/TREBLE
The BASS/TREBLE features enable you to
define the sound processor settings for
Bass and Treble.
1 Press to select the BASS/TREBLE
feature.
The BASS and TREBLE LED will be lit.
"ADAPT BASS AND TREBLE
LEVELS" will be displayed.
2 Use BASS/TREBLE CONTROL to select
the desired BASS or TREBLE level
respectively.
The BASS/TREBLE level will increase
or decrease between level +3 and
-3.
Press BASS 3 or 4 to select the low
tone level.
"BASS -X or BASS +X" will be
displayed.
Press TREBLE 3 or 4 to select the
high tone level.
"TREBLE -X or TREBLE +X"
will be displayed.
Note:
–"
X
" denotes the sound level.
pg 01-31/P88/22-Eng 3/6/00, 1:26 PM15