Philips M355 Stereo System User Manual


 
21
English
3139 115 21402
To stop storing the automatic preset
Press PROG or Ç on the system.
Note:
If no preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
Manual Preset Programming
1 Tune to your desired radio station (refer to
“Tuning to radio stations”).
2 Press PROG.
PROG starts flashing.
The next available preset number is displayed
for selection.
To store the radio station to another
preset number
Press í or ë to select the desired preset
number.
3 Press PROG again to store the radio station.
PROG disappears.
Repeat steps 13 to store other radio stations.
To exit manual preset mode
Press Ç on the system.
Notes:
If you attempt to store more than 40 preset
radio stations, "FULL" is displayed.
During programming, if no key is pressed within
20 seconds, the system will exit the Program mode
automatically.
Radio Reception
Tuning to preset radio stations
Once you’ve programmed the radio stations,
press í or ë to select the desired preset
number.
The preset number, radio frequency, and
waveband are displayed.
Erasing a preset radio station
1 Press í or ë to select the preset radio station
to be erased.
2 Press and hold Çon the system until
PRESET DELETED” is displayed.
The deleted radio frequency remains on the
display.
The preset numbers of all other preset radio
stations in the band with higher numbers are
also decreased by one.
Repeat steps 12 to erase other preset radio
stations.
For Recording, please refer to Tap e
Operation/Recording.
pg 001-031/M355/37-Eng 4/17/02, 12:55 PM21