Philips M355 Stereo System User Manual


 
19
English
3139 115 21402
2 To resume normal playback, press REPEAT
until "REPEAT OFF" is displayed.
REP is shown, except for REPEAT OFF mode.
Notes:
During program play mode, it is not possible to
repeat playback the current disc (Repeat Disc
mode).
Pressing the
Ç
button will cancel all repeat
modes.
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 99 tracks can be stored in the
memory in any order.
1 Load the desired discs on the disc tray (refer to
“Loading discs”).
2 Press CD 1/2/3 to select a disc.
3 Press PROG to start programming.
PROG starts flashing.
4 Press í or ë repeatedly (or numeric keys
0-9 on the remote control) to select the desired
track.
For MP3 disc, press ALBUM -/+ and
TITLE -/+ to select the desired album and
title for programming.
5 Press PROG to store the track.
Repeat steps 35 to store other discs and
tracks.
6 To end programming, press Ç once .
PROG stays and the program mode remains
active.
The total number of tracks programmed and
the total playing time are displayed.
For MP3 disc, total playing time will not be
shown.
7 To start program play, pressÉÅ .
"PLAY PROGRAM" is displayed.
Notes:
It is not possible to create a program with MP3
tracks from multiple CDs, or combined with normal
audio tracks.
If the total playing time is more than "99:59"
then "--:--" is displayed instead of the total
playing time.
If you attempt to program more than 99 tracks,
"FULL" is displayed.
During programming, if no button is pressed
within 20 seconds, the system will exit the Program
mode automatically.
To review the program
Stop playback and press í or ë repeatedly.
To exit review mode, press Ç.
Erasing the program
Press Ç once when playback is stopped or
twice during playback.
PROG disappears and "PROGRAM CLEARED"
is displayed.
Note:
The program will be erased when the system is
disconnected from the power supply or when the
disc tray is opened.
For Recording, please refer to Tap e
Operation/Recording.
CD Operation
pg 001-031/M355/37-Eng 4/17/02, 12:55 PM19