3139 116 19591 (ENG)
21
Selecting External
Equipment
If you have connected the audio out
terminals of the external equipment
(TV, VCR, Laser Disc player, DVD player,
or CD Recorder) to the AUX/CDR IN
terminals, you can hear the enhanced
sound from the system.
1 Press AUX (CDR/DVD) to select
the CDR/DVD mode.
™ "CDR/DVD" will be displayed.
2 Press AUX (CDR/DVD) again to
select external (normal AUX) mode.
™ "AUX" will be displayed.
STANDBY
ON
MINI HIFI SYSTEM
BANDC1 • 2 • 3
CDR
STOP•CLEAR
SEARCH•TUNING PLAY PAUSE PREV
NEXT
DUB
(HSD)
RECORD
A. REVDIM
CLOCK/
TIMER
PROG
BASS
TREBLE
wOOx
TECHNOLOGY
POWER SAVE
IR SENSOR
SIDE
V
O
L
U
M
E
PLUS
LEVEL
B
A
S
S
/
T
R
E
B
L
E
TAPE
CD
TUNER
AUX
P
E
R
S
O
N
A
L
D
S
C
V
E
C
TAPE 1•2
CD 1•2•3
FM•AM
CDR/DVD
PRESET
▲
▲
TAPE AUX/CDR
• If tape 2 is selected for playback;
™ "T2 " with "! or @" scrolling left or
right will be displayed depending
on the tape side selected.
3a(for playback on tape deck 2 only)
• Press í or ë to select tape side
(see Tape Side).
• Press A. REV to select the different
type of playback mode (see Auto
Reverse Playback).
4 Press Ç to end playback.
™ "T1 or T2" with "! ! ! or @ @ @"
will be displayed.
Note:
– When the tape has stopped playing,
the system will switch to standby mode
after 30 minutes if no button is
pressed.
Rewind/Fast Forward
When playback is stopped
1 You can rewind or fast forward the
tape by pressing à or á
respectively.
™ If rewinding, "T1 ! or T2 !" with
"! " scrolling left will be displayed.
™ If fast forwarding, "T1 @ or
T2 @" with "@" scrolling right will
be displayed
™ The tape will stop automatically at
the end of the rewinding or fast
forwarding.
2 Press Ç to stop rewinding or fast
forwarding.
During playback
• Press and hold à or á until the
desired passage is located.
™ "T1 or T2" with "! ! or @ @"
scrolling left or right will be
displayed depending on which
button is pressed.
™ During searching, the sound is
reduced to a low volume.
™ When you release à or á, the
tape continues playing.
Notes:
– During rewinding or fast forwarding of
a tape, it is also possible to select
another source (e.g. CD, TUNER, or
AUX).
– Before playing a tape, check and
tighten slack tape with a pencil. Slack
tape may get jammed or may burst in
the mechanism.
– C-120 tape is extremely thin and is
easily deformed or damaged. It is not
recommended for use in this system.
– Store the tapes at room temperature
and do not put them too close to a
magnetic field (for example, a
transformer, TV, or speaker).
.
Notes:
– There are two Auxiliary modes:
i. the normal AUX mode.
ii. the CDR mode, where the LINE
OUT of this mini system is muted.
You will not be able to record or
listen to the sound from the LINE
OUT.
– You are advised not to listen to and
record from the same source
simultaneously.
– All the sound control features (e.g. DSC,
wOOx, etc.) are available for selection.
pg 01-28/C85/37-Eng 2/16/00, 9:03 AM21