Philips FW768P Stereo System User Manual


 
23
English
TUNER
The system will search for every
available station in the FM waveband
first, then search the AM waveband.
All available stations will be stored
automatically. The frequency and
preset number will be displayed
briefly.
The system will stop searching when
all the available radio stations are
stored or when the memory for 40
preset radio stations is used.
The system will remain tuned to the
last stored preset radio station.
Notes:
You can cancel the automatic
programming by pressing PROGRAM or
STOP•CLEAR
Ç
(on the system only).
If you want to reserve a section of
preset numbers, for example preset
numbers 1 to 9, select preset 10 before
starting automatic programming; only
the preset numbers 10 to 40 will be
programmed.
Manual programming
1 Press TUNER (FM•AM).
2 Press TUNER (FM•AM) again to select
the desired waveband : FM or AM.
3 Press PROGRAM for less than one
second.
The
PROGRAM flag starts flashing.
The next available preset number will
be displayed for selection.
4 Press TUNING à or á to tune to the
desired frequency.
If you wish to store the radio station to
another preset number, press PRESET
4 or 3 to select the desired preset
number.
5 Press PROGRAM again.
The
PROGRAM flag disappears and the
radio station will be stored.
Repeat the
steps 3 – 5
to store other
preset radio stations.
Notes:
When 40 radio stations are stored and
you attempt to store another radio
station, the display will show
"
FULL
”. If you want to change an
existing preset number, repeat steps 3 –
5.
You can cancel manual programming by
pressing STOP•CLEAR
Ç
(on the
system only).
During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
Tuning to Preset Radio
Stations
Press PRESET 4 or 3 to select the
desired preset number.
The preset number, radio frequency,
and waveband appear on the display.