Filter
Top Products
18
English
When you have completed the Dolby Pro
Logic setup, you are ready to enjoy Home
Cinema sound.
• Press DPL (PRO
LOGIC) repeatedly to
select and cycle through
the various sound
modes.
Dolby Surround
™
Center
Phantom
™
Dolby 3 Stereo
™
Stereo
™
Dolby Surround …
™ The Dolby Pro Logic display panel
will light up with the selection.
Dolby Surround
This setting is for a full Dolby Surround Pro
Logic mode.
• Press DPL to select the Dolby Surround
mode.
™ The message
“DOLBY
SURROUND”
will be
displayed.
™ The DPL display
panel will light
up.
Dolby Center Phantom
This setting is for use without the center
speaker. It redistributes the center speaker
sound to the left and right speakers,
providing conventional stereo across the
front.
• Press DPL to select the Dolby Pro Logic
Center Phantom mode.
™ The message
“CENTER
PHANTOM”
will be
displayed.
™ The DPL display
panel will light
up.
Dolby 3 Stereo
Use this setting when full surround is not
required, but a wide stereo sound is
desired. It only requires the left, right and
center speakers.
• Press DPL to select the Dolby 3 Stereo
mode.
™ The message
“DOLBY 3
STEREO”
will be
displayed.
™ The DPL display
panel will light
up.
DOLBY PRO LOGIC
Normal Stereo
This setting is for normal stereo sound
without Dolby Pro Logic. It only requires the
left and right speakers.
• Press DPL to select the Stereo mode.
™ The message
“STEREO”
will be
displayed.
™ The DPL display
panel will light
up.
Important!
1 For the best Dolby Pro Logic sound,
switch on DPL with DSC set to
“Classic”.
2 Dolby Pro Logic mode will
automatically switch to normal
Stereo mode when headphones are
connected.
3 Switch to normal stereo mode when
you record on a tape.
SS
LR
C
PRO LOGIC
SS
LR
C
PRO LOGIC
SS
LR
C
PRO LOGIC
SS
LR
C
PRO LOGIC
DPL
M
BALANCE
LR