Philips MX3800D/22S Home Theater System User Manual


 
18
English
Repeat play
You can only select the repeat play mode during playback.
For DVD - Repeat chapter/title/disc
Press REPEAT repeatedly to select the following :
R-1” – repeat chapter.
R-A” – repeat title/disc.
For VCD/CD/MP3-CD - Repeat track/disc
Press REPEAT repeatedly to select the following :
R-1” – repeat the current track.
R-A” – repeat the entire disc.
Notes:
Repeat play might not work correctly with some DVDs.
For VCD, repeat play is not possible during PBC playback.
Repeat A-B
You can play a specific section in a chapter/track repeatedly.
1 Press REPEAT A-B at your chosen starting point.
2 Press REPEAT A-B again at your chosen end point.
The passage will now repeat continuously.
3 To resume normal play, press REPEAT A-B again.
Note:
The section A and B can be set only within the same
chapter/track.
Programme favourite tracks
You can play the contents of the disc in the order you want
by programming the order of the tracks to be played. Up to
99 tracks can be stored.
1 While playback is stopped, select or press PROGRAM to
enter programme mode.
P 00:00” is displayed.
2 Use the numeric keypad (0-9) to input the track
number in the order you want.
If you attempt to programme more than 99 tracks,
"FULL" is displayed.
3 Press OK to store the track.
Repeat steps 2-3 to store other tracks.
4 To start programme play, pressÉÅ .
5 To stop playback, press Ç once.
6 To cancel the programme, press Ç again.
Programme function can also be accessed via the
menu bar
1 Press SYSTEM MENU and select from the menu
bar.
2 Repeat steps 2-6 listed above to programme your
favourite tracks.
Special DVD/VCD features
A number of operations can be carried out directly via
the multiple menu bars on the TV screen without
interrupting disc playback.
From the left,
SETUP MENU SUBTITLE LANGUAGE SLOW
FAST REVERSE FAST FORWARD STATUS
From the left,
TITLE SEARCH CHAPTER SEARCH TIME
SEARCH ZOOM ANGLE STEP
PBC ON/OFF
From the left,
PROGRAM
IMPORTANT!
Some operations may be different or restricted,
depending on the disc format. Refer to the jacket
or case of the disc you are playing.
1 Press SYSTEM MENU.
The menu bar will be displayed across the top of the
TV screen.
2 Press 1 or 2 to move through the menu bar.
3 Press 4 to select the highlighted icon and use 34 keys
to select your preferred option.
4 Press OK to confirm a highlighted selection.
5 To exit, press SYSTEM MENU or OK.
Changing subtitle language
This operation works only on DVDs with multiple subtitle
languages.
Select
from the menu bar and press 4 key to select
the desired language.
OPERATIONS
pg 001-024/MX3800/22-Eng 4/23/02, 9:00 AM18