Filter
Top Products
20
English
Selecting various repeat
functions
Repeat play mode
● While playing a disc, press REPEAT to select
various repeat mode.
➜ "REPEAT” icon will appear on the display,
except REPEAT OFF mode.
DVD
CHAPTER REPEAT ON ™
TITLE REPEAT ON ™ REPEAT-OFF
VCD/SVCD/CD
REPEAT-ONE (repeat the current
track) ™ REPEAT-ALL ™ REPEAT-OFF
MP3
REPEAT-ONE ™ REPEAT-ALBUM ™
REPEAT-ALL ™ REPEAT-OFF
Helpful Hint:
– For VCD, repeat playback is not possible if the
PBC mode is switched on.
Repeating a section within a
chapter/track
1 While playing a disc, press REPEAT A-B at
the starting point.
2 Press REPEAT A-B again at the point to end
the section.
➜ The section A and B can be set only within
the same chapter/track.
➜ The section will now repeat continuously.
3 Press REPEAT A-B again to resume normal
playback.
Programme favourite tracks
(audio CDs and VCDs)
You can play the contents of the disc in the
order you want by programming the order of
the tracks to be played. Up to 99 tracks can be
stored.
1 Stop playback, then press PROG on the front
panel to enter programme mode.
2 Use the numeric keypad (0-9) to enter a
valid track number.
➜ "FULL" will appear if you have programmed
99 tracks.
3 Press OK to store the track.
4 Repeat steps 2~3 to select other tracks.
5 Press ÉÅ to start programme playback.
6 Press Ç to stop playback or exit programme
mode.
Clearing the programme
● Stop playback, then press the Ç again.
➜ "PROG CLR" appears.
Helpful Hints:
– If the DVD system is disconnected from the
power supply, it will erase the programme.
– For VCD, the programme option is only possible
if the PBC mode is turned off.
Disc Operations
TIPS: The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
001-035-MX2500-00-Eng 9/16/04, 10:4720