Filter
Top Products
26
English
Timer SLEEP
Setting the timer
The set can be used as an alarm clock, whereby
the selected source (CD, TUNER or USB) starts
playback at a preset time. Make sure the
clock is set before using the timer.
1 Press and hold TIMER on the remote control
until SET TIMER appears
➜ flashes. SELECT SOURCE scrolls
➜ Display shows current source CD, TUNER or
USB
2 Press SOURCE on the set repeatedly to select
the source (or press CD, TUNER or USB on
the remote control)
3 Press TIMER to confirm
➜ The hours digits start flashing
4 Hold down or press VOLUME +/- repeatedly
to set the hours (or turn VOLUME on the
set)
5 Press TIMER to confirm
➜ The minutes digits start flashing
6 Hold down or press VOLUME +/- repeatedly
to set the minutes (or turn VOLUME on the
set)
7 Press TIMER to confirm
➜ The timer is now set and activated
➜ At the set alarm time, the CD, TUNER or
USB will switch on (volume level: max. 20)
Note:
– The set will exit from the timer setting mode if
no button is pressed within 90 seconds.
Activating and deactivating
TIMER
● Press TIMER on the remote repeatedly to
activate or deactivate the timer.
➜ If activated, the last set source and start time
are displayed
➜ If deactivated, “TIMER OFF” appears
Helpful hints:
The timer will not work at the set time if
- the set is switched on
- the timer is deactivated
The set will switch to Tuner source
automatically if :
- no CD is inserted when the selected source is CD;
- no USB device is connected when the selected
source is USB
SLEEP
You can set a certain period of time after which
the set will switch off.
● On the remote control, press SLEEP
repeatedly to select the desired time period
options (in minutes):
➜ Display shows in sequence: Sleep 90, 75,
60, 45, 30, 15
➜ Display shows the selected option briefly and
returns to its previous status. The icon
appears
To deactivate the sleep timer, press
SLEEP again
➜ The icon disappears
or
Press STANDBY-ON to switch off the set (or
y on the remote control)
Helpful hints:
– The SLEEP function does not affect your alarm
time setting.
P001-P031_MCM275_37_Eng 12/20/2005, 09:4026