Filter
Top Products
No power
Ensure that the AC power plug of the Micro Hi-Fi is connected •
properly.
Ensure that there is power at the AC outlet. •
To save power, the Micro Hi-Fi switches to standby •
automatically 15 minutes after disc/tape play reaches the end
and no control is operated.
No sound or poor sound
Adjust the volume. •
Disconnect the headphones. •
Check that the speakers are connected correctly. •
Check if the stripped speaker wires are clamped. •
Left and right sound outputs reversed
Check the speaker connections and location. •
No response from the Micro Hi-Fi
Disconnect and reconnect the AC power plug, then turn on •
the Micro Hi-Fi again.
Remote control does not work
Beforepressinganyfunctionbutton,rstselectthecorrect •
source with the remote control instead of the main unit.
Reduce the distance between the remote control and the •
Micro Hi-Fi.
Insert the batteries with its polarities (+/– signs) aligned as •
indicated.
Replace the batteries. •
Aim the remote control directly at the sensor on the front of •
the Micro Hi-Fi.
No disc detected
Insert a disc. •
Check if the disc is inserted upside down. •
Wait until the moisture condensation at the lens has cleared. •
Replace or clean the disc. •
UseanalizedCDorcorrectformatdisc. •