Philips MCM103 Stereo System User Manual


 
16
10 Product
information
Note
Product information is subject to change
without prior notice.
Specications
Amplier
Rated Output Power 2X5W RMS
Frequency Response 60 - 16kHz, ±3dB
Signal to Noise Ratio >65dB
Aux Input 0.5 V RMS 20kohm
Disc
Laser Type Semiconductor
Disc Diameter 12cm/8cm
Support Disc CD-DA, CD-R,
CD-RW, MP3-CD,
WMA-CD
Audio DAC 24Bits / 44.1kHz
Total Harmonic
Distortion <1%
Frequency Response 60Hz -16kHz (44.1kHz)
S/N Ratio >65dBA
Tuner
Tuning Range FM: 87.5 - 108 MHz
Tuning Grid 50 KHz
Sensitivity
- Mono, 26 dB S/N
Ratio
< 22 dBf
Search Selectivity < 36 dBu
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1 When the unit is turned on, press SLEEP
repeatedly to select a set period of time
(in minutes).
When sleep timer is activated, the »
display shows
.
To deactivate sleep timer
1 Press SLEEP repeatedly until [OFF] is
displayed.
When sleep timer is deactivated, »
disappears on the display.
Listen to an external device
You can listen to an MP3 player through this unit.
1 Press MP3 LINK to select MP3 LINK
source.
2 Connect the supplied MP3 link cable to:
• MP3 LINK jack (3.5 mm) on the unit
the headphone jack on an external •
device
3 Start to play the device (see the device
user manual).
EN
MCM103_98_UM_V1.0.indb 16 9/14/2009 9:48:20 AM