Filter
Top Products
11
4 Press / to set the hour.
5 Press CLOCK/DISPLAYtoconrm.
The minute digits are displayed and »
begin to blink.
6 Press / to set the minute.
7 Press CLOCK/DISPLAYtoconrm.
Tip
To view the clock during play, press •
CLOCK/DISPLAY repeatedly until the
clock is displayed.
Turn on
1
Press POWER.
The unit switches to the last selected »
source.
Switch to standby
1 Press POWER to switch the unit to
standby mode.
The backlight on the display panel is »
dimmed.
The clock (if set) appears on the »
display panel.
To switch the unit to Eco Power Standby
mode:
1 In the standby mode, press and hold
POWER for more than 2 seconds.
The backlight on the display panel »
turns off.
Note
If you are not going to use the remote control •
for a long time, remove the batteries.
Do not use old and new or different types of
•
batteries in combination.
Batteries contain chemical substances, so they
•
should be disposed of properly.
Auto install radio stations
When you connect the unit to the power
supplyforthersttime,ornoradiostationis
stored in this unit, Plug and Play is activated to
store all available radio stations automatically.
1 Connect the unit to the power supply.
[AUTO INSTALL - PLEASE PRESS PLAY, »
STOP CANCEL] ((auto install - press
the PLAY button; to cancel, press
) is
displayed.
2 Press on the main unit to start
installation.
[AUTO] (auto) is displayed. »
The unit automatically store radio »
stationswithsufcientsignalstrength.
When all the available radio stations »
arestored,therstpresetradiostation
is broadcast automatically.
Set clock
1
Press and hold CLOCK/DISPLAY to
activate the clock setting mode.
The 12 hour or 24 hour format is »
displayed.
2 Press PROG repeatedly to select 12 hour
or 24 hour format.
3 Press CLOCK/DISPLAYtoconrm.
The hour digits are displayed and begin »
to blink.
English
EN
MCM103_98_UM_V1.0.indb 11 9/14/2009 9:48:18 AM