Philips MCi900/12 Stereo System User Manual


 
59
English
EN
2 From Home screen, select [Settings] >
[Clock settings] >[Date and time].
Or, press SETTINGS on the remote
control to enter [Settings].
3 In [Date and time], select [Current date
and time] > [Manual].
4 To enter date and time,
Press
or to select the entry
location;
Use the alphanumeric buttons to
enter desired digits;
Press OK to conrm.
You can also press
or
repeatedly, or press and hold
or
until the desired digit appears.
Set date/time format
Select how date and time are displayed in the
clock.
1 Follow Step 1-2 under “Manual setting”.
2 In [Date and time], go to [Time format]
or [Date format] to select options.
Network settings
Setup network
After the rst-time setup, you can change
how MCi900 connectsto home Wi-Fi/wired
network:
Switch between different connection
methods (wireless or wired,
automatic or manual);
Switch between different routers.
To do so, do the following:
1 From Home screen, go to [Settings] >
[Network settings] > [Setup network].
Or, press SETTINGS on the remote
control to enter [Settings].
2 Connect MCi900 as you did in the rst-
time setup (see ‘Connect to home Wi-Fi/
wired network’ on page 29).
Tip
According to the location and time zone you
select, the unit can have the clock time set
and adjusted automatically through the online
service over the Internet.
To check and change current location and time
zone, go to [Settings] > [Location and time
zone].
Through time signals from FM RDS radio
1 On the unit, turn on the FM radio, if
necessary.
Ensure that the FM antenna is
connected properly (see ‘Connect
the FM antenna’ on page 26).
2 On the rst location for preset stations,
store an FM RDS station that transmits
time signals.
3 From Home screen, select [Settings] >
[Clock settings] > [Date and time].
Or, press SETTINGSon the remote
control to enter [Settings].
4 In [Date and time], select [Current date
and time] > [Automatic (RDS)].
The unit searches for the rst preset »
station automatically.
The time is set according to time »
signals from the station.
Manual setting
1 Turn on the unit, if necessary.
13
Automatic (Internet)
Automatic (RDS)
Manual