Filter
Top Products
9
Your MCi300 turns on and is ready to
be set up for use.
Note
The type plate information is located at the back or at
the underside of the MCi300.
•
Turn on / switch to standby
You can select from the following status options:
On
Standby
Active standby. The
button on
the remote control can turn on the
MCi300.
Eco
standby
Passive standby. Only the
button
on the top panel can turn on the
MCi300.
Note
If no buttons are pressed for 20 minutes, the MCi300
switches to standby.
•
1 To turn on the MCi300, press .
2 To switch the MCi300 to standby, press .
3 To switch the MCi300 to eco standby,
press and hold the
button on the top
panel.
»
•
•
•
•
•
3 Prepare
Install remote control
batteries
Caution
Risk of explosion! Keep batteries away from heat,
sunshine or re. Never discard batteries in re.
Risk of decreased battery life! Never mix different
br
ands or types of batteries.
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
•
•
•
1 Open the battery compartment.
2 Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Position your MCi300
Caution
Risk of product damage! Place the MCi300 on a surface
that is level, at, and strong enough to support the
MCi300.
•
Connect AC power
Warning
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or
the underside of the MCi300.
•
1 Connect the MCi300 to the power supply
Prepare
English
EN