Filter
Top Products
16
English
FM Radio Reception
Tuning to radio stations
1 Press SOURCE on the set repeatedly or
press DAB/FM on the remote repeatedly to
select TUNER source.
2 Press down on TUNING 4 ¢ (or 5/6
on the remote control) and release the button.
➜ The display will show "SEARCH" until a radio
station with sufficient signal strength is found.
3 Repeat step 2 if necessary until you find the
desired station.
● To tune to a weak station, press TUNING 4
¢ (or 5/6 on the remote control) briefly
and repeatedly until you have found optimal
reception.
Programming radio stations
You can store up to 20 radio stations in the
memory.
Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only programme
stations which are not in the memory already.
1 Press ALBUM/PRESET 4 3 (or ¡ / ™ on
the remote control) to select the preset number
where programming should start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2 Press PROGRAM for more than 2 seconds to
activate programming.
➜ AUTO is displayed and available stations are
programmed. The first preset automatically
stored will then be played.
Manual programming
1 Tune to your desired station (see Tuning to radio
stations).
2 Press PROGRAM to activate programming.
➜ The next available preset number flashes for
selection.
3 Press ALBUM/PRESET 4 3 (or ¡ / ™ on
the remote control) to allocate a number from
1 to 20 to this station.
4 Press PROGRAM again to confirm the setting.
➜ The preset number and frequency of the
preset station are shown.
5 Repeat the above four steps to store other
stations.
● You can override a preset station by storing
another frequency in its place.
Tuning to preset radio stations
● Press ALBUM/PRESET 4 3 (or ¡ / ™ on
the remote control) until the desired preset
station is displayed.
MCB204_05-Eng 4/18/07, 9:45 AM16