Filter
Top Products
14
English
DAB Reception
Tuning to DAB for the first time
1 Press SOURCE on the system to select DAB
(or press DAB/FM on the remote control).
➜ The system will start full scan to search for all
available Band III channels automatically.
➜ If no DAB service is available, "NO SERVICE"
will appear on the display panel.
➜ If there are available DAB services, the system
will store all detected stations.
Re-tuning
By re-tuning, you can update your DAB multiplex
(ensemble) list all over again. At the completion
of scanning, the system will tune to the first
service of the first multiplex (ensemble) in the
updated multiplex (ensemble) list.
During scanning, the system will initially display
the following the following, where "CH" is the
DAB channel and "N" is the number of the
current multiplex (ensemble).
● Press and hold SMART/SCAN for more than
2 seconds.
➜ The display panel shows "F SCAN" and the
system will start full scan to search for all
available Band III channels again automatically.
● Press SMART/SCAN briefly.
➜ The display panel shows "Q SCAN" and the
system will start a quick scan process to search
for Band III channels again automatically.
● If you press 9 during scanning, the scanning
process will stop and the system will return to
the DAB frequency before scanning starts.
➜ The other DAB operation buttons will be
locked.
Note:
– If no DAB service is detected during the above
processes, the display panel will show "NO
SERVICE".
Manual tuning
1 Press and hold ENTER/ÉÅ for more than 2
seconds to start manual tuning.
➜ The current DAB channel and frequency will
be displayed.
2 Press S/T on the front panel or press 5 /
6 on the remote control to select your desired
DAB channels.
● Press ENTER/ÉÅ to confirm and tune to
your selected channel.
CH N
MCB204_05-Eng 4/18/07, 9:45 AM14