Filter
Top Products
English
19
Radio Reception
Tuning to radio stations
1 Press SOURCE on the front panel of the
system repeatedly or TUNER on the remote to
select TUNER.
➜ TUNER is displayed briefly.
2 Press SOURCE on the front panel of the
system or TUNER on the remote once or
more to select your waveband (FM/AM).
3 Press and hold ALBUM -/+ à /á (à /á
on the remote).
➜ The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: SEARCH.
4 Repeat step 3 if necessary until you find the
desired station.
● To tune to a weak station, press ALBUM -/+
à /á (à /á on the remote) briefly and
repeatedly until you have found optimal
reception.
Programming radio stations
You can store up to a total of 40 radio stations in
the memory for each band.
Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden.
1 Press TITLE -/+ í / ë (ALBUM/PRESET
+/- on the remote) to select the preset number
where programming should start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2 Press PROGRAM for more than 2 seconds to
activate programming.
➜ AUTO is displayed and available stations are
programmed in order of waveband reception
strength: FM followed by AM. The last preset
automatically stored will then be played.
pg001-027_MCM298_37_Eng 2006.7.3, 14:4619