Filter
Top Products
14
• [HDMI Audio] : Enables or disables
HDMI audio output for the TV.
• [CD Upsampling] : Converts the music
CD to a higher sampling rate using
sophisticated digital signal processing
for better sound quality.
• [Audio Sync] : Sets a delay for audio
output when you play a video disc.
4 Press OK to conÀ rm your choice.
Note
For settings related to HDMI, the TV must be •
connected through HDMI.
Night mode is available for Dolby encoded
•
DVD and Blu-ray discs (for models support
Blu-ray playback).
CD upsampling is only available in stereo mode.
•
Change video settings
1 Press SETUP .
2 Select [Video Setup] , then press OK .
3 Select and adjust the following settings:
• [TV System] : Selects a TV system that
is compatible with the TV.
• [TV Display] : Selects a picture display
format to À t the TV screen.
• [Picture Settings] : Selects a
predeÀ ned color setting.
• [HDMI Setup] : Selects HDMI video
resolution and the wide screen display
format for the TV. The Wide Screen
Display option is only available for 16:9
wide screen TV display setting.
• [Progressive] : Enables or disables
progressive scan mode.
4 Press OK to conÀ rm your choice.
Note
Some video settings depend on the video •
source, ensure that the disc and the TV
support the setting or feature.
The best setting is automatically selected for
•
the TV. If you need to change the setting,
ensure that the TV supports the new setting.
For settings related to HDMI, the TV must be
•
connected through HDMI.
For settings related to progressive or
•
component video, the TV must be connected
through Component Video.
Change general settings
1 Press SETUP .
2 Select [General Setup] , then press OK .
3 Select and adjust the following settings:
• [EasyLink Setup] : Sets up EasyLink to
enjoy easy controls of all the HDMI
CEC compliant devices using a single
remote control (see ‘Use Philips
EasyLink’ on page 13 ) .
• [Disc Lock] : Restricts play to disc.
Password (PIN code) is required to
unlock the disc before play.
• [Display Dim] : Changes the brightness
of the display panel.
• [OSD Language] : Selects the on-
screen display menu language.
• [Screen Saver] : Enables or disables
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
• [Sleep Timer] : Sets a sleep timer to
switch the home theater to standby
after a speciÀ c time.
• [DivX® VOD Code] : Displays the
DivX VOD registration code for the
home theater.
4 Press OK to conÀ rm your choice.
Note
Before you purchase DivX videos and play •
them on the home theater, register the home
theater on www.divx.com using the DivX
VOD code.
Change audio settings
1 Press SETUP .
2 Select [Audio Setup] , then press OK .
3 Select and adjust the following settings:
• [Night Mode] : Selects quiet or full
dynamic sound. Night mode decreases
the volume of loud sounds and
increases the volume of soft sounds
such as speech.
EN
1_HTS5200_12_EN-US_v3.indd Sec1:14 6/8/2010 1:35:51 PM