Philips HTL3120 Speaker User Manual


  Open as PDF
of 18
 
10 EN
• HIGH: Spice up your dull movies and
music with added sound effects.
• CLEAr: Hear every detail in your music
and clear voices in your movies.
• dEEP: Experience spoken words and
music vocals in comfort.
• OWN: Personalize the sound based on
your preferences.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1 Press SURR to select a sound option from
the display panel.
• AUtO: Intelligently select the best
surround sound mode based on the
media played.
• OFF: Two-channel stereo sound. Ideal
for listening to music.
• SURR: Multi-channel surround output.
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of the SoundBar.
1 Press TREBLE +/- or BASS +/- to change
the frequency.
Auto volume
Turn the auto volume on to keep the volume
constant when you switch to a different source.
1 Press AUTO VOL to turn auto volume on
or off.
Synchronize picture and sound
If the audio and video are not synchronized,
delay the audio to match the video.
1 Press AUDIO SYNC +/- to synchronize
the audio with the video.
Night mode
For quiet listening, decrease the volume of loud
sounds when audio is played. Night mode is
only available for Dolby Digital soundtracks.
1 Press NIGHT MODE to turn night mode
on or off.
Note
• If auto volume is set to turned on, you cannot enable
the night mode.
MP3 player
Connect your MP3 player to play your audio
lesormusic.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1 Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO-IN
connector on your SoundBar.
2 Press AUDIO-IN on the remote control.
3 Press the buttons on the MP3 player to
selectandplayaudiolesormusic.
USB storage devices
Enjoy audio on a USB storage device, such as an
MP3playerandUSBashmemory,etc.
What you need
• A USB storage device that is formatted
forFATlesystems,andcomplieswiththe
Mass Storage Class.
• AnMP3orWMAleonaUSBstorage
device
1 Connect a USB storage device to the
SoundBar.
2 Press USB on the remote control.
 previous next