Filter
Top Products
13
5 Play
Play from USB
Note
• Ensure that the USB device contains playable
music. (see ‘USB playability information’ on
page 16 )
1 Flip open the cover on the front panel.
2 Insert the USB plug of a USB device into the
jack.
3 Press USB to select the USB source.
The total number of tracks is displayed. »
4 Press ALB/PRESET / to select a folder.
5 Press / to select a fi le.
6 Press to start play.
During play, press and hold
• or
to search fast backward or forward.
Press
• to pause or resume play.
Repeat play
1 During play, press REPEAT repeatedly to
select:
» [REPEAT] (repeat): play the current track
repeatedly.
» [REPEAT ALL] (repeat all): play all tracks
repeatedly.
2 To return to normal play, press REPEAT
until the selected function is no longer
displayed.
Turn on
1 Press .
The unit switches to the last selected »
source.
To switch to standby mode:
1 Press .
The clock (if set) is displayed. »
To switch to Eco Power Standby mode:
1 Press for over 3 seconds.
The backlight on the display panel turns »
off.
The blue Eco Power indicator lights up. »
Set clock
1 In the standby mode, press and hold
CLOCK to enter the clock setting mode.
» Clock is displayed and the hour digits
begin to blink.
2 Press + VOL - to set the hour.
3 Press CLOCK to confi rm
The minute digits begin to blink. »
4 Press + VOL - to set the minute.
5 Press CLOCK to confi rm the clock setting.
Enable Easylink
EasyLink uses the HDMI CEC (Consumer Electronics
Control) industry standard protocol to share
functionality with all HDMI CEC compliant devices
over HDMI. It enables the connected devices to
control each other with a single remote control.
Note
EasyLink (HDMI CEC) is only applicable with •
certain criteria. Terms and conditions may vary
by product. Consult your product dealer for
information.
Philips does not guarantee 100%
•
interoperability with all HDMI CEC devices.
1 Press SETUP for over 3 seconds.
‘Easylink On’ is displayed. »
To disable Easylink, press and hold » SETUP
until ‘Easylink Off’ is displayed.
English
EN