Philips HSB2313A Stereo System User Manual


 
11
Connect coax supported devices
The home theater system can decode digital
audio signals. You can connect the system to
your digital ampli er or receiver.
1 Connect the supplied coaxial cable to the
COAXIAL jack on the main unit and the
COAXIAL/DIGITAL output jack on the
connected device.
You can connect an optical cable (not
supplied) to the OPTICAL jack on the
main unit and the COAXIAL/DIGITAL
output jack on the connected device.
Tip
You can connect all the devices to the home
theater system at the same time.
OPTICAL
HDMI OUTHDMI IN 1 HDMI IN 2
DIGITAL OUT
Amplifier
Connect HDMI supported devices
HDMI (High De nition Muiltimedia Interface) is
a digital interface that supports both audio and
video transmission through a single cable. If you
connect your HDMI-compliant DVD players and
TV to the home theater system, you can watch
DVDs or Blu-ray discs that contain HD (High-
De nition) content. This connection provides
the best picture quality.
Note
Some TVs do not support HDMI audio
transmission.
1 Connect an HDMI cable (not supplied) to
the HDMI OUT jack on the DVD player
and HDMI IN 1 or HDMI IN 2 jack on the
main unit.
2 Connect another HDMI cable (not
supplied) to the HDMI OUT jack on the
main unit and the HDMI IN jack on the TV.
If your TV has only a DVI (Digital Visual
Interface) connection, connect through
a HDMI/DVI adaptor. An extra audio
connection is needed to complete this
connection.
3 Press HDMI to select HDMI 1 or HDMI 2 .
OPTICAL
HDMI OUTHDMI IN 1 HDMI IN 2
HDMI OUTHDMI IN 2
TV
English
EN