Philips HK-0948-MCi500H-FR Stereo System User Manual


  Open as PDF
of 72
 
11
To select a number or an alphanumeric •
character, press a button once or more
until you see the number or alphabetic
character in the display of Wireless Micro
Hi-Fi System.
To cycle through the alphanumeric •
characters that are available, press a
button repeatedly.
To delete the last character entry from •
the display, press CLEAR.
This chapter shows you how to create
a wired connection to a home network
with automatic IP address.
1 Use an Ethernet cable (sold separately) to
connect Wireless Micro Hi-Fi System to
the access point or router that connects
to your home network with broadband
Internet access.
2 Turn on your wireless access point or
wireless router with broadband Internet.
3 Turn on Wireless Micro Hi-Fi System.
4 On Wireless Micro Hi-Fi System, press
MENU.
5 Select [Settings] > [Network] > [Wired]
> [Automatic] > (Apply settings?) [Yes]
and conrm.
Wireless Micro Hi-Fi System displays a »
conrmation screen that the settings
are saved.
Create wired connection
with static IP address
This is how to navigate and select with the
remote control:
Press •
or to select a menu option.
Press •
to conrm a selection.
Press •
to go back to the previous
screen.
Press • HOME to go to the Home menu.
The alphanumeric buttons of the remote
control are multi-function buttons:
To select a number or an alphanumeric •
character, press a button once or more
To cycle through the alphanumeric •
characters that are available, press a
button repeatedly.
To delete the last character entry from •
the display, press CLEAR.
This chapter shows you how to create a
wireless connection to a home network
with static IP address.
1 Ensure that your encryption key (if
required) is available.
2 Turn on your wireless access point or
wireless router with broadband Internet.
3 Turn on Wireless Micro Hi-Fi System.
4 On Wireless Micro Hi-Fi System, press
MENU.
5 Select [Settings] < [Network] >
[Wireless] and conrm.
6 Select the network from the list in the
display.
Enter encryption key with the •
remote control, then press OK /
to continue (if required).
7 Select [Static] and conrm.
8 Enter the static IP address with the
remote control and conrm.
9 Select (Apply settings?) [Yes] and
conrm.
Wireless Micro Hi-Fi System displays a »
conrmation screen that the settings
are saved.
Create wired connection
with automatic IP address
This is how to navigate and select with the
remote control:
Press •
or to select a menu option.
Press •
to conrm a selection.
Press •
to go back to the previous
screen.
Press • HOME to go to the Home menu.
The alphanumeric buttons of the remote
control are multi-function buttons:
English
EN
 previous next